7 Steps to Clean an Electric Kettle Using Simple Household Cleaners

We all know how convenient and easy it is to use an electric kettle but keeping it clean is more important than you think, here are 7 steps to help you clean this appliance by yourself using simple household cleaners. Electric kettles need proper cleaning to eliminate mold, mineral buildup, and bacteria which develop over time and also to prolong their life.

Related: Best Electric Kettle in UAE with Expert Reviews

You don’t have to use the gas stove to boil water. An electric kettle is one of the most needed appliances in an office where you get hot water instantly.

Requirements:

MaterialsEquipment/Tools
1. Baking Soda1. Microfiber Cloth
2. Distilled White Vinegar, Lemon Juice, or Citric Acid Powder2. Bottle Brush or Non-abrasive Sponge
3. Dishwashing Liquid
4. Olive Oil (optional)

You don’t have to use the gas stove to boil water. An electric kettle is one of the most needed appliances in an office where you get hot water instantly.

1. Descale the Electric Kettle Using Vinegar

For optimal descaling, combine equal volumes of water and distilled white vinegar in the kettle, filling it to approximately half capacity. Next, you need to bring the solution to a full boil. Activate the heating element to induce a full boil. Allow the vinegar solution to settle for at least 20 minutes. Subsequently, dispose of the cleaning solution.

2. Descale the Electric Kettle Using Lime Juice or Citric Acid Powder

As an alternative to distilled white vinegar, you can use a 1:1 solution of freshly squeezed or bottled lemon juice or citric acid powder and water may be employed for descaling purposes. Alternatively, 2 tablespoons of citric acid powder dissolved in half-filled water can be used. Then, bring this solution to a boil. In either case, the solution should be brought to a boil, followed by a dwell period of at least 20 minutes before disposal. Next, turn off the electric kettle. Before discarding this solution, ensure you allow it to sit for at least 20 minutes.

3. Unplug and Disassemble Your Electric Kettle

Ensure you unplug the cooled kettle before you clean any further. Then remove the water filter before cleaning the interior of the kettle.

4. Clean or Replace the Water Filter

As discussed in the previous step, hope you have removed the water filter from the electric kettle. By following the user manual, you can clean the removed water filter or water filter cartridge. Generally, most of the filters are made from metal so you can clean these filters by soaking them in a solution of hot water and distilled white vinegar at least for five minutes. Use a bottle brush to scrub it. Then, rinse with fresh water.

5. Scrub the Inside of the Electric Kettle

Next, we come to the steps of scrubbing the inside of the electric kettle and to keep it clean. Make use of a soft-bristled bottle brush or non-abrasive sponge to scrub the inside of the electric kettle. This loosens the mineral buildup. Ensure you pay attention to the spout as the mineral buildup tends to be heavy on the spout. Dipping the brush or sponge in pure vinegar will help to remove the mineral build up around the spout.

NOTE: Never immerse an electric kettle fully in water since this can destroy the heating element.

6. Clean the Exterior of the Electric Kettle

Wipe down the exterior of the electric kettle with a non-abrasive sponge dipped in a solution of warm water along with a few drops of dishwashing liquid to eliminate splatters or smudges. Now, you must be worried about how to get rid of tough spots. Simply dip the damp sponge in some dry baking soda. The gentle abrasive nature of baking soda helps to eliminate the mess. Once the exterior of the electric kettle is clean, simply wipe the electric kettle completely dry with a microfiber cloth to prevent the streaks.

Tip: To keep the exterior of a stainless steel electric kettle shiny and streak-free, put a few drops of olive oil on a cloth and then rub it on the outside of the electric kettle.

7. Reassemble the Electric Kettle and Do the Final Rinsing

The next step is to check whether the electric kettle is well-cleaned. If yes, then reassemble any components and fill half of the kettle with water for a final rinse. Plug it in and then bring the water to a full boil. Then, discard the water. Repeat the “rinse cycle” once more to ensure that all of the cleaning solution and loose minerals are gone totally.

These were the major steps involved to help you clean your electric kettle.

How Often You Should Clean an Electric Kettle?

The frequency of cleaning depends on how often you use your electric kettle. You need to wipe down the exterior to eliminate splatters and smudges at least once a week. If you are using the kettle daily to heat your water, you should descale the electric kettle at least 4 times a year to eliminate the hard water minerals. If the electric kettle has a water filter or cartridge, you should clean it every other month or as recommended by the manufacturer.

Essential Tips to Keep Your Electric Kettle Clean Longer

After every use of the electric kettle, always empty all the water. You can use the leftover water to water the plants or rinse out the sink. Make use of distilled water instead of tap water. This is crucial if you have hard water or if you use a natural well for your water supply. It is not recommended to boil any liquid other than water in an electric kettle. As a matter of fact, different liquids have different boiling temperatures. However, an electric kettle is designed only for water.

Follow these steps to clean your electric kettle and consume water that tastes great and pure every time you heat water in your kettle.

Leave a Reply

Your email address will not be published. Required fields are marked *